Font

Pitch

 

 

Roman

10, 12, 15, 17, 20, PS

 

 

Sans Serif

10, 12, 15, 17, 20, PS

 

 

1.Make sure that the printer is not printing.

2.Press the Font button. The first available font is displayed on the LCD. Press the Font button until the font that you want to use is displayed. The LCD goes back to the original state in a few seconds and the font you selected is set.

3.Press the Pitch button. The first available font is displayed on the LCD. Press the Pitch button until the pitch that you want to use is displayed. The LCD goes back to the original state in a few seconds and the pitch you selected is set.

About Your Printer’s Settings

You can make many settings that control printer functions with the printer’s control panel. While you can often set these functions through your software or printer driver, you may sometimes need to change a setting from the control panel by using the SelecType mode and default-setting mode.

For a detailed description of the settings you can change in the SelecType mode and default-setting mode, see “Understanding the printer’s settings” on page 87. For instructions on changing the settings, see “Changing the printer’s settings” on page 98.

Understanding the printer’s settings

This section describes the settings and options available in the SelecType mode and default-setting mode.

4

4

4

4

4

4

4

4

4

4

4

4

Control Panel

87