Menu

Values (default in bold)

 

 

IP address*5

000.000.000.000 to 255.255.255.255

Subnet mask*4

000.000.000.000 to 255.255.255.255

Default gateway*4

000.000.000.000 to 255.255.255.255

Save settings?*6

Yes, No

*1 After this is displayed, press the SetD (Top of Form) button to print all current settings.

*2 This setting is available only in IBM PPDS emulation mode.

*3 This setting is available only when the optional perforation cutter (#C81570X) is installed.

*4 These settings are available only when the optional Print Server is installed.

*5 This setting is available only when the optional Print Server is installed and the Get IP address setting is set to Panel or PING.

*6 This menu appears by pressing the Menu (Tear Off and Top of Form) buttons in the SelecType mode.

Page length for rear tractor

This setting allows you to set the page length (in inches) for the continuous paper loaded on the rear push tractor.

Page length for front tractor

This setting allows you to set the page length (in inches) for the continuous paper loaded on the front push tractor.

Skip over perforation

When you turn on this feature, the printer provides a one-inch (25.4 mm) margin between the last line printed on one page and the first line printed on the next page. Because most application program margin settings override margin settings from the control panel, you should use this setting only if you cannot set your top and bottom margins using your application.

90Control Panel