SelecType mode
The settings that are available in the SelecType mode are shown in the following table and explained in detail after the table.
Menu | Values (default in bold) |
|
|
Language | English, French, German, Italian, Spanish, |
| Portuguese |
|
|
Print settings*1 | Execute |
Page length for rear tractor | 3 inches, 3.5 inches, 4 inches, 5.5 inches, |
| 6 inches, 7 inches, 8 inches, 8.5 inches, |
| 11 inches, 70/6 inches, 12 inches, |
| 14 inches, 17 inches |
|
|
Page length for front tractor | 3 inches, 3.5 inches, 4 inches, 5.5 inches, |
| 6 inches, 7 inches, 8 inches, 8.5 inches, |
| 11 inches, 70/6 inches, 12 inches, |
| 14 inches, 17 inches |
|
|
Skip over perforation | Off, On |
|
|
Line spacing | 1/6 inches, 1/8 inches |
|
|
Left margin | 0 columns to 80 columns |
|
|
Right margin | 1 columns to 136 columns |
|
|
Platen gap | Auto, 0 to 14 |
|
|
Auto tear off | Off, On |
|
|
Auto line feed | Off, On |
|
|
Print direction | |
|
|
Software | ESC/P, IBM PPDS |
|
|
0 slash | Off, On |
|
|
I/F (Interface) mode | Auto, Parallel, Serial, USB, Optional |
|
|
Auto I/F (Interface) wait time | 10 seconds, 30 seconds |
|
|
Parallel I/F | Off, On |
mode |
|
|
|
Packet mode | Auto, Off |
|
|
88Control Panel