6.Slide the two paper supports so they are spaced evenly between the two sprockets.

Note:

When you use the paper with less than four inches wide, remove the paper supports.

7.Fit the sprocket holes of the paper over the sprocket pins. If there is slack in the paper or if the holes in the paper do not align properly with the sprocket pins, pull the paper slightly and use the pull tractor knob to adjust the position of the paper as shown below. Slide the knob to the right first, and then turn it as necessary.

cCaution:

Be sure the sprockets on the built-in front tractor and the optional pull tractor are aligned.

140Options and Consumables