Save settings?
This menu appears by pressing the Menu (Tear Off and Top of Form) buttons in the SelecType mode. When you select Yes, the current settings in the SelecType mode are saved.
You can make settings for continuous forms with labels and the panel lock out mode in the default setting mode. These settings are shown in the following tables.
Continuous forms with labels
The following settings are available only when the Continuous forms with label setting is set to On in the SelecType mode.
Menu | Values (default in bold) |
|
|
Label base position | Paper left edge, First dot |
|
|
Label top position | 0 to 4752/216 (by 1/216 inches) |
|
|
Label length | 0 to 4752/216 (by 1/216 inches) |
|
|
Label left position | 0 to 1440/120 (by 1/120 inch) |
|
|
Label width | 0 to 1440/120 (by 1/120 inch) |
|
|
Base sheet PG position | 0 to 14 |
number |
|
|
|
Label paper PG position | 0 to 14 |
number |
|
|
|
4
4
4
4
4
4
4
4
4
4
4
4
Control Panel | 97 |