3.As described in the instructions, compare the alignment patterns and select the aligned pattern number with the best alignment by pressing the Font (ItemU) or Pitch (ItemD) button. The LCD shows the pattern number that is selected at the time. Press the SetD (Top of Form) button to fix the selected pattern number, and the next set of alignment patterns is printed.
4.Select the pattern with the best alignment for each of the remaining sets of alignment patterns.
5.After you select the best pattern in the final set of alignment patterns and save your selection by pressing the SetD (Top of Form) button, turn off the printer and exit the bidirectional adjustment mode.
Canceling Printing
If you encounter problems while printing, you may need to cancel printing.
You can cancel printing from your computer by using the printer driver, or from the printer’s control panel.
Using the printer driver
To cancel a print job before it is sent from your computer, see “Canceling Printing” on page 76.
Using the printer’s control panel
Pressing the Font (ItemU) and Pitch (ItemD) buttons at the same time stops printing, clears the print job being received from the active interface, and clears errors that may have occurred at the interface.
5
5
5
5
5
5
5
5
5
5
5
5
Problem Solver | 127 |