Special Setting for Thin Paper

If thin paper creases when you print, you can solve the problem by using the control panel to select the Special paper type setting.

To change the paper type setting to Special, first make sure the printer is on line. Then press the MANUAL button and hold it down for several seconds. SP appears on the display to show that the printer is in the Special mode.

To return to the normal setting, repeat the steps described above. (SP disappears from the display.)

To permanently save the paper type setting, first make sure the printer is on line. Then press ON LINE while pressing the MANUAL button.

Note:

lThe paper type setting returns to the saved setting if the FEED light is off, no panel buttons are pushed, and no data is sent to the printer for ten minutes.

The RESET function does not change the paper type setting.

lThe FACTORY RESET function changes the paper type setting or paper path setting to normal.

lThe paper type setting is not affected by the paper size setting. For example, even if you select the Cl0 envelope size, the paper type setting does not change.

You cannot change the paper type setting when the FEED light is on.
5-6 Paper Handling