Paper HandlingThe printer prints a page and then stops.The display reads PAPER SIZE ERROR and the CONTINUE light flashes.

You may have selected the wrong paper size with your application software. Check the paper size setting in your software.

You may be trying to use a non-standard paper size (one that is not listed on the P-SIZE menu in SelecType Level 1). You may be able to feed this paper manually as described in Chapter 5. Be sure to use only paper sizes that are within the specified range listed in Chapter 8.

The paper size currently set with P-SIZE may not match your paper size. There are several ways of dealing with this error: if the FEED light is out, simply press CONTINUE to clear the error.

Then press the SelecType button to enter SelecType Level 1. Make sure that the correct paper cassette is selected and that the paper size you wish to use matches the P-SIZE setting. If it does not, change the P-SIZE setting and save the new setting with the SYSTEM CONFIG option SAVE MACRO setting.

If the FEED light is on, indicating that data remains in the printer, you cannot change SelecType settings. However, you can still enter SelecType Level 1 and check the INPUT and P-SIZE settings. If you are using an incorrect paper size, simply replace it with the size indicated in P-SIZE and continue printing. If the SelecType settings are incorrect, you need to press RESET to clear the data in the printer. Next, enter SelecType Level 1 and change the paper-size setting to match the size of the paper you are using. Save the new setting with the SYSTEM CONFIG option SAVE MACRO setting and continue with your printing. For more information on using SelecType, see Chapter 4.

Troubleshooting 7-27