Epson II press, SelecType, to choose INDIVIDUAL or AUTO-SENSE, If you want to change the setting, press, After you set the channel, you see the following display:

SelecType Options

CHAUTO-SENSE

This option specifies how the printer’s memory is allocated among the channels. There are two basic settings: AUTO-SENSE and INDIVIDUAL. With AUTO-SENSE the printer automatically detects which interface channel (parallel, serial, or optional) is being used. This is the default setting and is the best choice for most uses of the printer. The INDIVIDUAL setting requires you to add memory to the printer and allows you to allocate independent memory to each channel. Choose INDIVIDUAL only if you regularly print raw data such as DOS text or program lists.

If you want to change the setting, press			to enter the option, then
press	or	to choose INDIVIDUAL or AUTO-SENSE.

If the channel shown is correct, press twice to save the setting. If you need to change the channel, press to move to the channel

position, then press or to select the channel (P, S, or 0) you want. This setting determines which channel is the default, but if the default channel is not in use, the printer uses any other channel that is being used. Then press D to set the channel.

After you set the channel, you see the following display:

Press D to execute the save and initialize operation. Your setting is now saved and also is in effect every time you turn the printer on.

SelecType 4-29