Status and Error Messages

[E]PAPER OUT [paper source] [paper size]

There is no paper in the paper source from which the printer expects to feed paper. The right column of the display prompts you to load the correct paper size into the paper source.

[E]PAPER SIZE ERROR

The paper size you selected with SelecType (or the default size if you have not selected a size) does not match the paper loaded in the selected paper source. Press CONTINUE to clear the error.

Insert the correct paper or change the P-SIZE setting with your application software or with SelecType as described in Chapter 4.

[S] PRINTINGThe printer has received data and is printing.[S]PRINT STOPThe printer stops printing during a multi-copy print operation.[S]RAM Check X.X MBThe printer is checking RAM (X.X = capacity).[S]READYThe printer is ready to print.[E] REINSERT CARD

If this message appears on the display, you may have removed an identity card or a font cartridge while the FEED light was still lit or while the printer was on line. To correct the error, make sure the printer is off line. Next, reinsert the card or cartridge and press CONTINUE.

EREMOVE CARD

You may have inserted an identity card or a font cartridge while the printer was on line or while the FEED light was on. To correct this error, take the printer off line, then remove the card or cartridge and press CONTINUE. Before reinserting the card or cartridge, make sure that all data in the buffer has been printed and that the printer is off line. If the FEED light is on, press FEED to print out the remaining data.

Troubleshooting 7-5