Epson II 4-4 SelecType, SelecType Level 2 functions

SelecType Overview

SelecType Level 2 functions

TEST PRINT	Prints two test patterns.
MODE ASSIGN	Chooses one of the emulation modes: HP
	LaserJet III’, Epson LQ, Epson FX, or (with the
	optional identity card installed) Epson GL.
I/F CONFIG	Configures the parallel and serial interfaces.
RX-BUFFER SIZE	Chooses the size of the receive buffer,
CH	Channel mode. Sets the interface channels to
	auto-sense or individual.
CH TIMEOUT	Channel time out. If no data is sent during the
	specified time period, the printer switches
	from one channel to the other.
AUTO CONT	Automatic continue. Permits the printer to
	continue printing instead of stopping under
	certain error conditions.
P-CONFIG SAVE	Printer configuration save. Saves all Level 2
	settings.
FACTORY RESET	Returns all Level 1 and Level 2 settings to their
	factory settings.
VERSION	Displays the version numbers of the printer’s
	controller and font.
PAGE COUNTER	Displays the total number of sheets printed by
	the printer and the number by the current
	photoconductor unit.
STANDBY	Conserves power by reducing power to the
	fixing heater when the printer is not used for
	30 minutes.

4-4SelecType