Epson II Press, -64 to +63, Then press, 4-18 SelecType, Use this option to load one of the macros you’ve created using the

SelecType Options

L-OFFSET0

-64to +63

Use the L-OFFSET (left offset) option to make fine adjustments in the position of the printing on the page. The setting is in dots; each dot is 1/300th of an inch (0.0846 mm). With this option, you can move the printing on the page approximately 1/5th of an inch (5 mm) to the left (settings from -1 to -64) or to the right (settings from 1 to +63). The factory setting is 0.

MEMORY LEFT K

This option displays the amount of memory (in kilobytes) available. You can use this information to see whether a newly-installed memory option is working correctly or to see how much memory you have available for fonts or complex graphics.

LOAD MACRO 0

0 to 4

Use this option to load one of the macros you’ve created using the

SAVE MACRO option. The factory setting is 0. When you press , the following appears on the display:

Press	or	to choose the number of the macro you want to use.
Then press		to load the selected macro. Whenever you select

macro 0, all Level 1 settings return to their factory settings. Press to exit this submenu without loading a macro.

4-18SelecType