Epson II VERSION, STANDBY, AUTO CONT, SelecType, TEST PRINT, I/F CONFIG, CH TIMEOUT, MODE ASSIGN, P-CONFIGSAVE, PAGE COUNTER, RX-BUFFERSIZE, FACTORY RESET

SelecType Options

Level 2 options

When you press and hold down the SelecType button for a few seconds (until the SelecType LEVEL2 message appears on the display) to enter Level 2, one of the main menu options listed below appears on the display:

TEST PRINT

MODE ASSIGN

I/F CONFIG

RX-BUFFER SIZE

CH

CH TIMEOUT

AUTO CONT

P-CONFIG SAVE

FACTORY RESET

VERSION

PAGE COUNTER

STANDBY

Each of these options is described below. An asterisk (*) indicates the factory default setting, if there is one.

TEST PRINT

Print two different test patterns to check whether your printer is

working correctly. After TEST PRINT appears, press once to see the following display:

Press to print Pattern 1 (vertical lines) or press to display Pattern 2 (horizontal lines); then press to print Pattern 2.

SelecType 4-21