SelecType Options

CTS OFF

ON *OFF

When CTS (Clear To Send) is off, the signal level is permanently set HIGH. The factory setting is off (signal level is HIGH). This setting should be set to off for most communications purposes. When CTS is on, data is sent to the computer only when CTS is HIGH.

RX-BUFFER SIZE

1 to 99 (K)

The receive buffer size option allows you to change the size of the printer’s input buffer. By choosing an appropriate buffer size, you can quickly transfer the contents of a file from the computer’s memory to the printer’s memory. The printer then prints the information from its own memory and frees up the computer for other tasks. If you set the buffer size too high, you may get an error message telling you to add memory. The factory setting is 1K.

4-28 SelecType