Epson II SelecType, Save the setting, without changing a setting, press, Set, select, or execute the option, To set, select, or execute an option, you simply press D

Using SelecType

The icon to the left of AUTO indicates that the option is not selected and >SET indicates that you can set that option by pressing .

Note: Although the main menu options are the same for all operating modes (LQ, FX, and LJ-2P), some Level 1 submenu options are different in each mode. Submenu options for each mode are discussed later in this chapter.

Set, select, or execute the optionTo set, select, or execute an option, you simply press D

Press D to select AUTO. Then SET disappears from the display and the > icon moves to the right of the display indicating that the new option has been set:

At the same time, the icon moves to the left of the main menu option, indicating that you are back in the main menu.

Note: If you want to back out to the main menu at any time

without changing a setting, press as many times as necessary.

Your new setting remains in effect until you change it again or turn off the printer.

Save the setting

If you want a setting to remain in effect even when you turn the printer off and on, you can use the SYSTEM CONFIG option to save Level 1 settings, and the P-CONFIG SAVE option to save Level 2 settings. The SYSTEM CONFIG option SAVE MACRO setting is described in Chapter 5, Changing the paper-size setting. The P-CONFIG SAVE option is described later in this chapter.

SelecType 4-9