Epson II and, 4-30 SelecType, Press to move to the following display:, If you choose INDIVIDUAL, you see this display:

SelecType Options

If you choose INDIVIDUAL, you see this display:

CAUTION: Do not use the INDIVIDUAL setting unless you have installed additional memory as described in Appendix A. If you save this option before adding memory, you could damage your printer.

Press to move to the following display:

The number on the left is the total number of megabytes (M) available, and the number to the right of each channel is the proportion of the memory allocated to that channel. Use the

and buttons to change the proportion numbers (between 0 and 9).

Note: When you share the printer, each printer channel requires at least 0.3K of RAM and the printer always needs some portion of RAM for general operation. If you use one memory chip set to increase the printer’s memory to 1.0MB, your best settings would be 3:4:3 or 4:3:3 or 3:3:4.

Then press to set the numbers and move to the following display:

4-30SelecType