Status and Error Messages

[E]ILLEGAL CARD

A card in the card slot or a cartridge in the cartridge slot cannot be read. To correct this error, take the printer off line and then press CONTINUE. If the error message remains, make sure the printer is off line and remove the card or the cartridge.

[S] INITIALIZEThe printer is being initialized to the factory or optional settings.[E] INSUFF MEMORY

The printer has insufficient memory available for the task you have given it. To correct the error, press CONTINUE. If the message remains, press RESET or perform INITIALIZE as described in Chapter 4. This error can also be cleared by turning the printer off and back on again. However, it may be necessary to simplify the page you are trying to print or add more memory to the printer. See Appendix A for information on adding memory.

[E]PAGE BUFFER FULL

Text or graphics data has filled the printer’s buffer and an incomplete page is ejected. Press CONTINUE to clear the error. You may need to add more memory to the printer. See Appendix A for information on adding memory.

[S]PAPER FEEDINGThe printer is feeding paper.[E]PAPER JAM

Paper is not being fed into the printer or paper is jammed inside the paper path. See the PAPER JAM section later in this chapter.

[E]PAPER OUT

There is no paper in the standard paper cassette or the optional multi-media feeder (if installed). Insert more paper into the selected paper cassette or manually feed a sheet of a paper into the printer. See Chapter 5 for more information on loading paper.

7-4Troubleshooting