SelecType Options

MODE ASSIGN

This option allows you to choose one of the three operating (or emulation) modes.

* LJ-2P

LQ

FX

The HP emulation mode offers the widest range of features, but you may also want to select the other modes to use software written specifically for other printers. You must change the MODE ASSIGN setting before you can operate your printer as an Epson LQ or FX printer.

Press

. The following display appears:

 

 

 

 

 

 

When you change the printer mode, you first select a channel, P (parallel), S (serial), or 0 (optional). Optional appears only if you

have installed an optional interface. Press until the channel you want to choose appears; then press .

Press D to set the new mode. This mode remains in effect until you change the setting again or turn off the printer. If you want this setting to remain in effect even after you turn the printer off and back on, use the P-CONFIG SAVE option to save the setting as described later in this chapter.

4-22 SelecType