Using the EPSON Remote! Utility

The EPSON Remote! utility allows you to easily change the printer’s default settings from your computer’s DOS prompt.

Installing EPSON Remote!

Follow the steps below to install EPSON Remote!

1.Insert the printer software CD-ROM in a disk drive.

2.At the DOS prompt, type D:\SETUP. (If you inserted the disk in a drive other than drive D, substitute the appropriate letter.) Then press Enter.

3.Select your printer’s name in the Printer Model window and press Enter. C:\EPUTIL appears as the default directory.

4.Press Enter again. The EPSON Remote! utility is copied to the C:\EPUTIL directory.

Accessing EPSON Remote!

To access EPSON Remote!, type C:\PRNSET at the DOS prompt and press Enter. Then follow the on-screen instructions to use this utility. You can also access EPSON Remote! by typing C:\PANEL at the DOS prompt and pressing Enter. The PRNSET and PANEL access methods differ slightly. The PANEL method opens a condensed version of EPSON Remote! that only provides the most often used settings.

4-30Using the Printer Software