❏Before printing, set the paper thickness lever (located under the printer cover) to the proper position for your paper. See the table on page 3-3, for details.

❏Be sure your multipart forms do not exceed 0.39 mm (0.015 inch) in thickness.

Loading envelopes

3

 

You can load envelopes in the top paper slot only, as described in “Loading Single Sheets in the Top Paper Slot” on page 3-8.Also follow these guidelines:

❏Load envelopes one at a time in the top slot, with the flap fold first and the flap side up.

flap side up, printable side down

❏Set the paper thickness lever (located under the printer cover) to position 2 or 6 to match the thickness of the envelope.

❏Do not use envelopes that are curled or folded. Also avoid using envelopes that are too thin; they may curl during printing and become jammed.

❏If you are using No. 6 envelopes, align the left edge of the envelope with the arrow mark on the printer.

Printing on Single Sheets 3-5