Installing an optional cut-sheet feeder

You install the single-bin, high-capacity, and double-bin cut-sheet feeders in the same way. Follow the steps in this section.

Note:

Before you install the double-bin cut-sheet feeder, you need to assemble it as described on “Assembling the double-bincut-sheet feeder” on page A-16.

1.Make sure the printer is turned off. Then remove the paper guide by moving it to the upright position and pulling it straight up. Lift the printer cover by its back edge and then pull it straight up and off the printer.

A-6Enhancing Your Printer With Options