Follow these steps to select a built-in font or pitch using the buttons on the printer’s control panel:

1.Make sure that the printer is not printing. If it is, wait until printing has finished.

2.To select a font, press the Font button until the three Font lights indicate the font you want as shown below.

Font lights

Font

 

 

 

 

 

 

o o n

Draft

 

 

 

 

 

 

o n o

Roman

 

 

 

 

 

 

o n n

Sans Serif

 

5

 

 

 

n o o

Courier

 

 

 

 

 

n o n

Prestige

 

 

 

 

 

 

n n o

Script

 

 

 

 

 

 

n n n

Others

 

 

 

 

 

 

n= On, o = Off

* others means the font selected in the default-setting mode

Note:

The Font button cannot directly select OCR-B, Orator, Orator-S, Script-C, Roman-T, or Sans Serif H. To select one of these fonts, you must first use the default-setting mode to register it as the “other” font. Note that the default “other” setting is Roman-T.

3.Press the Condensed button to turn the condensed mode on or off. The table below shows normal and condensed printing.

Changing Printer Settings From the Printer’s Control Panel 5-3