6. | Slide the right sprocket to match the width of your paper, but |
|
| do not lock it. Move the paper support midway between the |
|
| two sprockets as shown in step 5. |
|
7. | Make sure your paper has a clean, straight edge. Then open | 2 |
| both sprocket covers and fit the first three holes of the paper, |
printable side down, over the tractor pins. Then close the sprocket covers.
front of the printer
8.Slide the right sprocket to remove any slack in the paper; then lock it in place by pushing the sprocket lock down.
9.Attach the paper guide as described on “Attaching the Paper Guide” on page
Printing on Continuous Paper