To remove the roll paper holder, carefully lift up the printer and pull out the roll paper holder from beneath the printer.
Loading roll paper
After you install the roll paper holder, follow the steps below to load a roll of paper,
1.Make sure the printer is turned off. Open the paper guide cover and remove the paper guide.
2.Make sure the paper tension unit is installed.
3.Set the paper thickness lever (located under the printer cover) to the proper position for the thickness of your roll paper.
4.Set the paper release lever to the
5.Cut the leading edge of the roll paper straight across.
6.Insert the roll paper holder shaft into the center of the paper roll as shown.