Plugging in the Printer
1
1. Make sure the printer is turned off.
2.Check the label on the back of the printer to make sure its voltage matches that of your electrical outlet. Also make sure the plug on your printer’s power cord matches your electrical outlet.
wWarning:
It is not possible to change the printer’s voltage. If the rated voltage and your outlet voltage do not match, contact your dealer for assistance. Do not plug in the power cord.
3.If the power cord is not attached to the printer, plug the appropriate end into the AC inlet on the back of the printer.
4.Plug the power cord into a properly grounded electrical outlet.
Setting Up the Printer