Changing default settings

Follow the steps on the next page to enter the default-setting mode and change the printer’s default settings.

Note:

❏To print the language selection and default-setting mode instructions, you need five sheets of A4 or letter size single-sheet paper, or five pages of continuous paper that is at least 279 mm (11 inches) long and 210 mm (8.27 inches) wide. See Chapter 2 for instructions on loading continuous paper, or Chapter 3 for instructions on loading single sheets.

❏If you use single sheets, you need to load a new sheet of paper each time the printer ejects a printed sheet.

1.Make sure paper is loaded and the printer is turned off.

cCaution:

Whenever you turn off the printer, wait at least five seconds before turning it back on; otherwise you may damage the printer.

2.While holding down the Font button, turn on the printer. The printer enters the default-setting mode and prints the language selection instructions.

3.Press the Font button until the Font lights indicate the language you want, as described in the language selection instructions.

5-10Changing Printer Settings From the Printer’s Control Panel