Removing a printed document from the push tractor

To remove the printed document, follow these steps:

1. Make sure the Tear Off/Bin lights are flashing. (This indicates your paper is at the current tear-off position.) You may need 2 to press the Tear Off/Bin button.

2.Open the paper guide cover, and tear off the printed document using the tear-off edge of the paper tension unit.

Note:

If your paper’s perforation is not properly aligned with the tear-off edge, you can adjust the tear-off position using the micro adjust feature. See “Adjusting the tear-off position” on page 2-35.

cCaution:

Never use the knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position.

3.Close the paper guide cover.

When you resume printing, the printer automatically feeds the paper back to the top-of-form position and starts printing.

Printing on Continuous Paper 2-11