The skip over perforation

Turn off the skip over perforation

setting is on.

setting in the default-setting mode or

 

the EPSON Remote! utility. See

 

“About Your Printer’s Default

 

Settings” on page 5-4or “Using the

 

EPSON Remote! Utility” on page 4-30.

The printer prints strange symbols, incorrect fonts, or other inappropriate characters.

Cause

What to do

 

 

Your printer and computer

Make sure that you are using the

are not communicating

correct interface cable and that the

correctly.

communications protocol is correct.

 

See “Optional interface cards” on

 

page A-4and your computer

 

documentation. If you installed an

 

optional serial interface card, also see

 

“Installing an Interface Card” on page

 

A-29.

The wrong character table is selected in your software.

Select the correct character table using your software, the default-setting mode, or the EPSON Remote! utility. The character table setting in your software overrides settings made in the default-setting mode or the EPSON Remote! utility.

The printer you want to use is not selected in your software.

Choose the correct printer from the Windows desktop or in your application before printing.

Your application software is not configured correctly for your printer.

Make sure that your application software is set up correctly for your printer. See your application documentation. If necessary, install or reinstall the printer driver software as described in Chapter 1.

7-14Troubleshooting