8.Adjust the right paper guide so that it matches your paper’s width and lock it in place. Make sure the position of the guide allows the paper to move up and down freely.

If you are loading envelopes, push back the envelope levers as shown below.

9. Push back the paper set levers to clamp the paper or envelopes

A

against the guide rollers.

The cut-sheet feeder automatically loads paper when the printer

 

 

receives data.

 

If the first line on your page appears too high or low, you can fix

 

this by adjusting the top-of-form position using the micro adjust

 

feature. See “Adjusting the Top-of-Form Position” on page 2-31.

 

Enhancing Your Printer With Options A-15