When set to Auto, the printer analyzes the data and uses unidirectional printing for any lines which require vertical printing alignment.
Software
When you select ESC/P2, the printer operates in the EPSON ESC/ P2 mode. When you select IBM 2390 Plus, the printer emulates an IBM printer.
0 slash
The zero character has a slash (0) when this feature is on. It has no slash (0) when this feature is off. The slash allows you to easily
distinguish between the uppercase letter “O” and a zero. | 5 |
| |
High speed draft |
|
When you choose On, the printer prints up to 400 cps (characters |
|
per second) at 10 cpi (characters per inch). When you choose Off, |
|
the printer prints up to 300 cps at 10 cpi. |
|
I/F (interface) mode |
|
The printer comes with a |
|
interface slot in which you can install one optional interface. For |
|
information on using an optional interface, see “Optional |
|
| |
If your printer is connected to only one computer, select Parallel |
|
or Optional for the interface mode, depending on the interface you |
|
use. If your printer is connected to two computers, select Auto |
|
(automatic) to allow the printer to automatically switch between |
|
interfaces depending on which one is receiving data. |
|
Changing Printer Settings From the Printer’s Control Panel