❏Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
❏Do not use a damaged or frayed power cord.
❏If you use an extension cord with the printer, make sure the total ampere rating of all devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
❏Unplug the printer before cleaning, and clean it with a damp cloth only.
❏Do not spill liquid on the printer.
❏Except as specifically explained in this guide, do not attempt to service the printer yourself.
❏Unplug the printer and refer servicing to qualified personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the cabinet damaged; or if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.
❏ | Printer parts marked with this symbol may be hot. |
| K Turn off the printer and let it cool for a few minutes |
| before you touch any printer part marked with this |
| symbol. |
10Getting to Know Your Printer