Control Panel Buttons and Lights
Font button | Condensed button | |||||
Selects the font. | Turns on and off the | |||||
See Chapter 5. | condensed mode. | |||||
Font lights | Condensed light | |||||
Indicate which | Lights up when the | |||||
font is selected. | condensed mode is | |||||
|
|
| on. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LF/FF button
●Feeds paper line by line when pressing shortly.
●Ejects a single sheet or advances continuous paper to the next
Paper Out light
●On when no paper is loaded in the selected paper source or paper is not loaded correctly.
●Flashes when paper has not been fully ejected or a paper jam has occurred.
Tear Off/Bin button
●Advances continuous paper to the
●Feeds continuous paper backward from the
●Selects a
●Turns on the card mode to print on postcards and envelopes. See Chapter 3.
Tear Off/Bin lights
● f f when continuous paper is in the | |
| |
● | o n when bin 1 of the optional cut- |
| sheet feeder is selected. |
● | n o when bin 2 of the optional cut- |
| sheet feeder is selected. |
| n n |
Load/Eject button
●Loads a single sheet of paper.
●Ejects a single sheet of paper if a sheet is loaded.
●Loads continuous paper from the standby position.
●Feeds continuous paper backward to the standby position.
Pause button
Stops printing temporarily, and resumes printing when pressed again. When pressed for three seconds, turns on the *micro adjust mode. To turn off, press again.
Pause light
●On when the printer is paused.
●Flashes when the printer is in the *micro adjust mode.
●Flashes when the print head has overheated.
● | when the printer is in the card |
| mode. |
n= On
f= Flashing o = Off
*Micro Adjust mode
When you hold down the Pause button for three seconds, the printer enters the micro adjust mode. In this mode, you can press the LF/FFD and Load/EjectU buttons to adjust the