EPHD04+ HDcctv DVR

6.9.4I/O Control

The I/O Control setup menu is used to define the settings for controlling the DVR through RS- 485 / RS-232 communication protocol and for DVR to control the connected PTZ cameras. Please note that the RS-232 port on the DVR is currently reserved.

Figure 6-42

RS-232 (The RS-232 port of the DVR is currently reserved)

Type: Select Control or Text Insert.

Baud Rate: This field is to set the speed at which is used to transmit instruction or

information through the RS-232 port on the DVR. There are eight different speeds: 1200 BPS, 2400 BPS, 4800 BPS, 9600 BPS, 19200 BPS, 38400 BPS, 57600 BPS and 115200 BPS.

Data Bit: This field is the data bit at which you will be transferring. There are two settings for

this option: 8 or 7.

Stop Bit: This field is to set the stop bit for the RS-232 connection. There are two different stop bits, 1 or 2.

Parity: This field is to select the parity level at which you will be connected. You can choose between None, Odd, or Even parity levels.

Note: For details on the RS-232 related settings, please consult the Technical Support Department of EverFocus.

105

Page 113
Image 113
EverFocus EPHD04+ user manual 4 I/O Control, RS-232 The RS-232 port of the DVR is currently reserved