EPHD04+ HDcctv DVR
98
By default, the RAID function is disabled. To enable RAID 0/1, follow the steps below:
1. Select RAID 0 or RAID 1, the following message appears. Click Yes to configure the RAID
settings. And the DVR will automatically reboot.
Figure 6-33
2. Enter the RAID menu again, the RAID 0 / 1 is enabled.
If you want to change the settings between RAID 0 and RAID 1, you have to check the Disable
option first to return to the default disk setting, and the message in Figure 6-33 will appear.
Click Yes for the DVR to reboot (return to the default disk setting). Go to the RAID menu again,
select RAID 0 or RAID 1, the message will appear again, click Yes for the DVR to configure the
disk setting to RAID 0 / 1.