EPHD04+ HDcctv DVR
107
6.9.5 Misc.
You can upgrade the latest firmware, restore the factory default settings to the DVR, upload /
save the DVR configuration settings from / to the USB or change the language in this setup
menu.
Figure 6-43
Firmware
Current Firmware Version: Shows the current firmware version of the DVR.
Upgrade: Click to upgrade the latest firmware. Note you will need to restore the firmware file
to the USB flash device and then connect the USB flash device to the DVR.
Configurations
Load Factory Default: Click to restore the DVR to factory default settings. The User Account,
Network IP Settings, and Time settings will not be affected.
Load From USB: Click to upload the DVR configurations restored in the USB flash device.
Save To USB: Click to save the DVR configurations to the USB flash device.
Language: Choose which language the DVR uses. The available languages may vary among
regions.
Allowed Remote Reboot: Check the box to enable restarting the DVR via the Network.