EPHD04+ HDcctv DVR
Timeout: Select this option and then set up the Timeout Duration in the field below, the alarm output will last for the setup duration time (1 ~ 150 seconds).
Permanent: Alarm will remain active until the user presses the “Enter” key on the IR Remote Control or resets the alarm remotely.
Transparent: Alarm output remains as long as the alarm input is active.
Trans + Timeout: Alarm output continues until event ends, then continues for the setup duration time (1 ~ 150 seconds).
Timeout Duration: This function only appears when you select Timeout or Trans + Timeout options in the Output Type
Main Monitor: Select Full Screen to force the camera which detects motion to display full screen on the Main Monitor. The full screen camera view will last according to the Output Type selected in the field above.
Call Monitor: Select Full Screen to force the camera which detects motion to display full screen on the Call Monitor. The full screen camera view will last according to the Output Type selected in the field above.
Edit Motion Grid: Press the button to bring up the Motion Setting menu. To edit the motion grids, please refer to the instructions later in this section.
Apply To: Click the button to apply the same settings to the desired cameras.
To Edit the Motion Grids:
1.Click the Edit Motion Grid button, the Motion Setting menu appears.
Figure
2.Click on the image and the grid will be displayed.
60
