Fluke 5020A user manual Sensor ID, Channel Setting

Menu Functions 5

Channel Menu

avu005.jpg

Figure 5-4. Channel Setting

Use the A D buttons to select the setting to change. The B C buttons are used to change the setting parameters. Press the E button to save the new setting. Press the F button to cancel any changes and exit to the menu.

Sensor ID

The SENSOR ID function allows each sensor to be uniquely identified. This may be password-protected to prevent it from being changed. The model number and serial number are displayed here but cannot be edited. The sensor ID cannot be set for a channel without a sensor attached. The sensor ID is stored in the sensor, not in the thermo-hygrometer.

avu006.jpg

Figure 5-5. Sensor ID

Use the B C and E buttons to select the sensor identification to change. The B C buttons are used to move among character positions and the A D buttons are used to change the character. Letters, numeric digits, space and underscore can be used. Press the E button to save the setting. Press the Fbutton to cancel any changes and exit to the menu.

5-5