Fluke 5020A user manual ALARmBEEP bool, ALARmCLEar, ALARmDATEFIRSt?, ALARmDATELAST?, ALARmDISPlay?

5020A

Users Manual

ALARm:BEEP <bool>

Sets the state of the audible alarm enable. Example: ALAR:BEEP 1

The <bool> parameter turns the alarm beep enable on (1 or ON) or off (0 or OFF). This command may be password protected (see Password Commands).

ALARm:CLEar

Clears the alarm events.

Example: ALAR:CLE

The alarm clear command clears the alarm events.

ALARm:DATE:FIRSt?

Returns the date of the first alarm event.

Example: ALAR:DATE:FIRS?

Response: 2003,8,10

The response is returned in the format, <year>,<month>,<day>.

If no alarm has been triggered, the response is: 2000,0,0.

ALARm:DATE:LAST?

Returns the date of the last alarm event.

Example: ALAR:DATE:LAST?

Response: 2003,8,10

The response is returned in the format, <year>,<month>,<day>.

If no alarm has been triggered, the response is: 2000,0,0.

ALARm:DISPlay?

Returns the state of the visible alarm enable. Example: ALAR:DISP?

Response: 0

A value of 1 is returned if the alarm display is enabled. A value of 0 is returned if the alarm display is disabled.

ALARm:DISPlay <bool>

Sets the state of the visible alarm enable. Example: ALAR:DISP 1

The <bool> parameter turns the alarm display enable on (1 or ON) or off (0 or OFF). This command may be password protected (see Password Commands).

ALARm:POWer?

Indicates whether a power loss alarm event has occurred.

Example: ALAR:POW?

6-14