Fluke 5020A user manual Symbols Used, Safety Information

5020A

Users Manual

Symbols Used

Table 1-1 lists the International Electrical Symbols. Some or all of these symbols may be used on the instrument or in this manual.

Table 1-1. International Electrical Symbols

Symbol Description

BAC (Alternating Current)

DAC-DC

MBattery

PCE Complies with European Union Directives

FDC (Direct Current)

YDouble Insulated

XElectric Shock

IFuse

PE Ground

Hot Surface (Burn Hazard)

Read the User’s Manual (Important Information)

Off

On

)Canadian Standards Association

CAT	OVERVOLTAGE (Installation) CATEGORY II, Pollution
	Degree 2 per IEC1010-1 refers to the level of Impulse
	Withstand Voltage protection provided. Equipment of
	OVERVOLTAGE CATEGORY II is energy-consuming
	equipment to be supplied from the fixed installation. Examples
	include household, office, and laboratory appliances.

;C-TIC Australian EMC Mark

Safety Information

Use this instrument only as specified in this manual. Otherwise, the protection provided by the instrument may be impaired.

The following definitions apply to the terms “Warning” and “Caution”.

•“Warning” identifies conditions and actions that may pose hazards to the user.

•“Caution” identifies conditions and actions that may damage the instrument being used.

Warnings

To avoid personal injury, follow these guidelines.

•DO NOT use this unit in environments other than those listed in the User's Manual.

•Follow all safety guidelines listed in the User's Manual.

•Calibration equipment should only be used by trained personnel.

1-4