Fluke 5020A user manual Keep your password in a secure location, 44. Password

Menu Functions 5

System Menu

avu045.jpg

Figure 5-44. Password

By default the password is set to “5020A” when the instrument ships from the factory. We recommend the user changes the default password to secure the password-protected settings.

NOTE

Keep your password in a secure location.

If an incorrect password is entered, the message WRONG PASSWORD is displayed and access to the password-protected parameters is denied. Press the E button to reenter the password.

If a correct password is entered, the password-protected parameters PASS, SENSOR, RECORD, STATS, ALARM, and TIME are displayed.

The PASS parameter allows the user to change the password and consists of a four digit number.

The SENSOR parameter allows the user to turn the password-protection for sensor and channel settings ON or OFF.

The RECORD parameter allows the user to turn the password-protection for data recording settings ON or OFF.

The STATS parameter allows the user to turn the password-protection of statistics and daily stats settings ON or OFF.

The ALARM parameter allows the user to turn the password-protection of alarm settings ON or OFF.

The TIME parameter allows the user to turn the password-protection of time and date settings ON or OFF.

Press the B C buttons to highlight the digit to change. Use the A D buttons to scroll through the numbers 0-9. Press the E button to save the new setting. Press the F button to cancel any changes and to move to the next parameter or exit to the menu.

Note

Keep your password in a secure location and do not forget the password.

5-33