Fluke 5020A user manual Data Print, Data Storage

Menu Functions 5

Data Menu

Press the E button to display the data for the selected starting date and time in graphical format. Press the F button to cancel any changes and exit to the menu.

Data Print

The DATA PRINT function allows recorded data to be printed over the serial or IR port. The PORT parameter is selectable between SERIAL and IRDA/IRCOMM, depending on the IRMODE setting. The FORMAT parameter may be set to BINARY or TEXT for the serial port or IRCOMM port. The BEGIN parameter sets the start date and the start time from which to start printing. The format of the start date is according to D FORM in SYSTEM, DATE-TIME (Section ). The format of the start time is 24 hour format.

avu022.jpg

Figure 5-21. Data Print

The B C buttons are used to change the parameters. Press the E button to save the new setting.

Press the F button to cancel any changes and exit to the menu.

Data Storage

The DATA STORAGE function allows viewing the status of the data memory. The FILLED parameter shows the percentage of storage space used. The BYTES parameter shows the number of bytes stored. The CAP parameter shows storage capacity, in bytes. The INDEX parameter shows percentage of space used in the record block index. The BEGIN parameter is the date of the earliest data. The END parameter is the date of the latest data.

5-17