Fluke 5020A user manual Digital Communications Interface, Interface Commands

	Digital Communications Interface	6
	Interface Commands
*OPT?	Returns configuration options
*RST	Sets the instrument operating parameters to defined
	conditions
*SRE?	Returns the Service Request Enable register
*SRE <num>MINMAXDEF	Sets the Service Request Enable register
*STB?	Returns the Status Byte register
*TST? [<bool>]	Returns the self-test results (0: startup test; 1: new
	test)
ALARm:BATTery?	Returns the battery alarm event
ALARm:BATTery:ENABle?	Returns the state of the battery alarm enable
ALARm:BATTery:ENABle <bool>	Enables or disables the battery alarm
ALARm:BEEP?	Returns the state of the alarm beep enable
ALARm:BEEP <bool>	Enables or disables the alarm beep
ALARm:CLEar	Clears the alarm events
ALARm:DATE:FIRST?	Returns the date of the first alarm event
ALARm:DATE:LAST?	Returns the date of the latest alarm event
ALARm:DISPlay?	Returns the state of the alarm display enable
ALARm:DISPlay <bool>	Enables or disables the alarm display
ALARm:POWer?	Returns the power loss alarm event
ALARm:POWer:ENABle?	Returns the state of the power loss alarm enable
ALARm:POWer:ENABle <bool>	Enables or disables the power loss alarm
ALARm:RHUMidity<chn>:LOW?	Returns the state of the low humidity alarm for the
	specified channel
ALARm:RHUMidity<chn>:LOW:ENABle?	Returns the state of the low humidity alarm enable for
	the specified channel
ALARm:RHUMidity<chn>:LOW:ENABle <bool>	Enables or disables the low humidity alarm enable for
	the specified channel
ALARm:RHUMidity<chn>:RATE?	Returns the state of the humidity rate alarm for the
	specified channel
ALARm:RHUMidity<chn>:RATE:ENABle?	Returns the state of the humidity rate alarm enable for
	the specified channel
ALARm:RHUMidity<chn>:RATE:ENABle <bool>	Enables or disables the humidity rate alarm for the
	specified channel
ALARm:RHUMidity<chn>:RATE:LIMit?	Returns the humidity rate alarm limit for the specified
	channel
ALARm:RHUMidity<chn>:RATE:LIMit	Sets the humidity rate alarm limit for the specified
<num>MINMAXDEF	channel
ALARm:RHUMidity<chn>:SENSor?	Returns the state of the humidity sensor alarm for the
	specified channel

6-5