Table 4.1

Button functions

 

 

 

 

 

Button name

Function

 

 

 

 

 

Start

 

 

This button is used to indicate ‘Start’ to scanner in

 

 

 

TEST mode or SETUP mode at Off-line. This

 

 

 

button is disabled while scanner operates in

 

 

 

On-line.

Stop

 

 

This button is used to indicate ‘Start’ to scanner in

 

 

 

TEST mode or SETUP mode at Off-line. This key

 

 

 

is used to cancel temporary error while operating at

 

 

 

On-line.

 

 

 

This key is used to lower the hopper table to the

 

 

 

bottom during waiting for Hopper-Timer.

 

 

 

This key is used to display the abrasion counter

 

 

 

during displaying the ready screen.

Manual

 

 

This button is used to select manual feeding mode.

 

 

 

By pressing this key, setting is switched between

 

 

 

manual feeding and ADF mode.

Mode 1

 

 

This button is used to start Off-line SETUP mode

 

 

 

with Power switch. This button is used to select

 

 

 

item in Off-line SETUP mode.

Mode 2

 

 

This button is used to start Off-line TEST mode

 

 

 

with Power switch. This button is used to select

 

 

 

item in Off-line SETUP mode.

Table 4.2

LEDs function

 

 

 

 

 

 

LED

 

Color

 

Function

 

 

 

 

 

Power

 

Green

 

When Power switch is turned on, this LED

 

 

 

 

 

is turned on.

Read

 

Green

 

While scanning, this LED is turned on.

Check

 

Yellow

 

The scanner mulfunction is detected, this

 

 

 

 

 

LED is turned on. When temporary error

 

 

 

 

 

(Paper Jam, and so on) is detected, this

 

 

 

 

 

LED is blinked. Temporary error is cleared

 

 

 

 

 

and Stop button is pressed, this LED will

 

 

 

 

 

be turned off.

4-4

M3099GX/GH OEM Manual