17 Press [Mode 2] once and press [Mode 1] once. Place the document on the stacker. Then press [START].
NOTICE: The scanner prints the five digit numbers from the
initial number by the increment of one.
NOTICE: Before pressing [START], you can set document size, resolution and so on. (See OPERATOR’S GUIDE)
A3. Print head A3.1 Replacing the print head handling
When “INK EMPTY” is displayed in LCD display, the operator is responsible to change the print head as follows.
Endorser cover
| or | |
Print head | Print head | |
lock lever | ||
|
1 Open and remove the endorser cover at the rear top corner of the scanner. Power of the scanner will turn off, if the power is on at cover open.
2 Turn the print head lock lever up, then | ENDORSER |
replace the print head. |
|
3 Attach the new print head in the endorser and turn the print head lock lever back.
4 Close the endorser cover back.
M3099GX/GH OEM Manual |