Table 5.1 Device and operator actions for temporary errors (continued)

LCD display

Scanner actions

Action to recover

 

 

 

 

 

 

HOPPER

[When a read operation is

- The error is

EMPTY

activated, the pick sensor

recovered by

 

(SPK) goes off but not the

issuing the start

 

hopper empty sensor (SHE)

command.

 

is off.]

 

 

- If an error is detected, the

 

 

hopper table is lowered.

 

 

Then, “Temporary Error” is

 

 

returned to the host

 

 

computer and an error

 

 

message is displayed on

 

 

the LCD display.

 

 

[The hopper empty sensor

- Load documents on

 

(SHE) goes on during

the hopper and

 

reading.]

start reading them.

 

- The read operation is

 

 

terminated normally.

 

 

After the document is

 

 

ejected into the stacker,

 

 

the hopper table is

 

 

lowered.

 

 

When a START, READ,

 

 

or SENSE command is

 

 

received from the host

 

 

computer, “Temporary

 

 

Error” is returned.

 

 

*: This status is not detected

 

 

in the manual mode.

 

5-2

M3099GX/GH OEM Manual