Information: | 00000000h(If ILI=0) |
The information field is valid when ILI bit is set to 1 for READ command, the difference of the required length(Transfer Length) minus the actual length in bytes. (Negative values are indicated by two’s complement notation)
INTERFACE
Additional Sense Length: 0Ah(10 bytes)
This field indicates the number of additional sense bytes to follow. If the allocation length of the command descriptor block is too small to transfer all of the additional sense bytes, the additional sense length is not adjusted to reflect the truncation.
Command Specific Information: 00000000h(not supported)
ASC (Additional Sense Code): This field indicates further information related to the error or exception condition reported in the sense key field.
The additional sense code qualifier (ASCQ) indicates detailed information related to the additional sense code.
Field replaceable unit code: 00h(not supported)
Sense Key specific bytes: 000000h(not supported)
The additional sense bytes field may contain command specific data, peripheral device specific data, or vendor specific data that further defines the nature of the CHECK CONDITION status.
M3099GX/GH OEM Manual |