CHAPTER
5 | ERROR PROCESSING AND RECOVERY |
|
This chapter provides how to handles temporary errors and equipment errors and what the operator should do to recover the scanner.
Table 5.1 lists the scanner and operator actions for temporary errors.
ERROR PROCESSING AND RECOVERY
LCD display (*1) | Scanner actions (*2) | Action to recover (*3) |
|
|
|
|
|
|
PAPER | - The normally read document is | - Open the upper |
JAM | ejected to the stacker and the | transport unit and |
| mechanism system is stopped to | remove the |
| suspend the read operation. | document on the |
| - “Temporary Error” is returned | transport path. |
| to the host computer and an | Then, close the unit. |
| error message is displayed on | - Return the |
| the LCD display. | jammed or |
| - The hopper table is lowered | |
| to the bottom. | document to the |
|
| hopper and read it |
|
| again. |
|
|
|
*1: More detailed error messages are shown by the method specified in maintenance manual.
*2: Common action at temporary errors is 0.5 second interval buzzer for 3 seconds.
*3: The temporary errors are recovered by pressing the stop button.
M3099GX/GH OEM Manual |