B3.10 Reset of endorser

When you reset the number to the initial number, you must see Section A2.4 of Appendix A.

B3.11 Reset of ink counter

When you reset the ink counter, you must see Section A2.5 of Appendix A.

B3.12 Setting SCSI-ID

When you set the SCSI-ID, you must set as follows.

<< SETUP MODE >>

SCSI-ID SET

Screen 24

SCSI-ID SET

5

Screen 25

31 At Screen 2, press [Mode 1] twelve times to go to the SCSI-ID SET screen. (Screen 24)

32 Press [Mode 2] to see Screen 25. (The default setting is “5”.)

33 At Screen 25, the SCSI-ID is from 0 to 7 each time you press [Mode 1].

34 Press [Mode 2] to see Screen 24. The settings are stored to EEPROM.

35 When you close the setup mode, go to 9 .

B3.13 Setting Product-ID

When you set the Product-ID, you must set as follows.

<< SETUP MODE >>

PRODUCT-ID SET

Screen 26

PRODUCT-ID SET

X X X X X X

Screen 27

36 At Screen 2, press [Mode 1] thirteen times to go to the PRODUCT-ID SET screen. (Screen 26)

37 Press [Mode 2] to see Screen 27. (The default setting is “M3099GH” in case of M3099GH and “M3099G” in case of M3099GX.)

B-10

M3099GX/GH OEM Manual