5 Reset the print head life counter by the procedure stated in section A2.5. (See
NOTICE)
You can test the printing by the procedure in section A2.6
NOTICE: The reset of the print head life counter is important to correctly detect the life of the new print head.
A3.2 Print head position adjustment
You can adjust the print position in mainscanning direction manually. The position you can set is limited as stated in section 1.
Endorser cover | 1 | Open and remove the endorser cover at |
| the rear top corner of the scanner. Power | |
|
| |
|
| of the scanner will turn off, if the power |
|
| is on at the cover open. |
| 2 | Pinch the tab near the print head and |
|
| slide it to the position you want to print. |
|
| The print position is indicated by the |
|
| indicater behind the tab and the label |
| or | attached on the rear cover. |
|
| |
| 3 | Close the endorser cover. |
Tab
You can test the printing by the procedure in section A2.6.
M3099GX/GH OEM Manual |