GE GFK-0787B user manual Printing the GMR Configuration

6

In this example, you decide that you don't want to keep CONFIG4, so you go to the file functions and select Close. That ends the configuration session without creating a .SAV file.

Next, you select Open a Configuration File. A list of files appears:

Click on the name of the .SAV file you want, or type in its filename. When the filename appears in the name box, click on Open. The configuration file is loaded into RAM. With the correct configuration file displayed, select Output: Write Config to create a G_M_R10 output file.

After creating the file, you can add it to the application program as instructed on page 7-29.

Printing the GMR Configuration

When the GMR configuration is finished, select Output to print it out. The GMR software establishes many parameters of the system configuration that you will need to be familiar with during Logicmaster configuration and Genius block configuration.

Printing defaults to the parallel port of the computer running the GMR Configuration Software. If you want to redirect printing to a serial port, exit to DOS and use the DOS ªmodeº command, as instructed in your DOS manual.

6-44	GeniustModular Redundancy Flexible Triple Modular Redundant (TMR) System	GFK-0787B
	User's Manual ± March 1995